"Capturing one Still Moment of a babies life"

Baby - Breathing Mechanism + Voice Box

$174.95 AUD

175 reward points

  • Model:
    [2795]
  • 3 Units in Stock

Bring your reborn dolls to life, with your very own breathing mechanism + voice box for your reborn dolls.

This Breathing Mechanism includes a voice box that simulates a real babies breathing and baby sounds. The Breathing Mechanism can be easily be seen and felt when your hand is gently resting on the chest. 
The voice module is actived by remote control and has baby sounds pre loaded aswell as the option to play your own baby sounds from any Bluetooth enabled device.
Each breathing mechanism is designed and hand made in Australia, using quality local and imported products.

SSuits dolls size:  21" - 23" 

Breathing mechanism closed position Breathing mechanism closed  1/4 open
   

What's included:
  Breathing Mechanism ( Size: 117mm x 86mm x 54mm )
  USB Rechargeable Battery Pack
  USB Connection Cable
  Stocking (pre installed)
  Foam wrapped for added softness
  Audio Remote control
  Protective box -  can then be used as a storage box for your accessories. 

How to use your Breathing Mechanism + Voice Box:
 Using the USB cable provided in your protective box, connect the Larger USB type-A to the battery pack.
 Connect the opposite smaller end of the USB cable to the breathing mechanism's Micro-USB connector.
 Pressing the button on the breather will activate and de-activate your baby breather.
 Your breathing mechanism will beat until the battery runs out or the button is pressed to stop it.
 Pressing the top button will active the heart beat, which will beat 5 times before turning off.
 During operation, your battery pack will illuminate blue.
 After use, the battery pack will automatically turn itself off, and the blue light will turn off.

How to recharge your battery pack:
 Using the same USB cable provided in your protective box, connect the Smaller Micro-USB to the battery pack.
 Connect the opposite larger end of the USB cable to any USB wall charger (standard phone style charger) or a powered USB port (a computer/laptop etc..)
 While charging, your battery pack will flash red until fully recharged.

USB Battery Packs Blue charge light
USB Blue Light (Battery Pack On)
USB Battery Pack Red Light
USB Red Light (Battery Pack Charging)

Using the Voice Box:
  First make sure the battery box is switched on
  Your voice module will turn on automatically when first switched on. 
  You can use the on/off switch on your remote cotroller, to turn the voice box on and off.
  Volume: To adjust the volume, use the "VOL+ / VOL-" when the audio is at maximum, you will hear a beeping sound
  To change how the audio sounds, you can use the EQ button on your remote controller.

Built in Baby Sound Moods:

Audio box remote control

The voice box will automatically cycle through 9 different baby moods. 
Each Baby Mood corresponds to the same number on your remote controller.
You can also use the forward and backward buttons on the remote, to skip a mood.
1. Happy Baby
2. Laughing / Giggling
3. Restless / Grumpy
4. Sad Crying Hungry
5. Feeding
6. Burping and Hiccups
7. Pooping
8. Playful / Cheerful
9. Sleeping

To switch from auto cycle mood mode press "RPT" on your remote to switch to repeat mode.

To connect to a Bluetooth enabled device:
In addition to the built in baby sounds, your voice module includes a Bluetooth module allowing you to connect to any Bluetooth supported phone, mp3 player etc..
Press the Mode button on your remote control and you will hear: "The Bluetooth device is ready to pair." or a ready to connect sound.
On your Bluetooth enabled device, turn on bluetooth and add the Bluetooth device: 
When you have successfully connected your device you will hear: "The Bluetooth device is connected successfully" or a connected sound.
You will now be able hear the audio played through your device on your voice box. So you can make and record your very own baby sounds to be used.

How to insert into your Breathing Mechanism + Voice Box:
  Cut a small hole in the lower back of your original body for the battery box connector to come out from. Finish with an eyelet tool.
 Insert your fluffing (polyfil) and weighting sack into the lower part of the body.
 Then insert your breathing mechanism into the body ontop of the weighting sack and push the cable through the small hole you made.
 Add enough fluffing around the breathing mechanism so that it covers the breather evenly all round, more fluffing is recommended at the back of the breather, to help push it forward so it can be seen more easily from the front / chest.
 You're now ready to assemble the doll.
 Attach the battery box connector to the cable coming from the back of the body, and then simply slip the battery box into the nappy where it wont be felt or seen.

Important Details:
A slight noise can be heard from the breathing mechanism in a quiet room during operation.
Installation is required.

This listing is for a breathing mechanism +Voice and a small USB Rechargable battery pack only!!
Body not included

 


Add to Cart:











Ask a question


Copyright © 2019 (Still Moments Nursery).     Designed by Timothy John